Can Acorn use step and direction for spindle

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
thomsl@mac.com
Posts: 11
Joined: Thu May 19, 2022 12:19 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Can Acorn use step and direction for spindle

Post by thomsl@mac.com »

Is it possible for the Acorn to use step and direction to drive an AC Servo so it can be used as a spindle motor?

AC Servo motor -AASD 1.8 KW

Thanks for your comments and ideas.

Top
cnckeith
Site Admin
Posts: 9074
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Can Acorn use step and direction for spindle

Post by cnckeith »

no, but its on the to do list.

others have used 0-10 and cw/ccw direction change input on the drive.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63

Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
tblough
Community Expert
Posts: 3557
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:
Contact tblough

Re: Can Acorn use step and direction for spindle

Post by tblough »

https://centroidcncforum.com/viewtopic. ... vo+spindle
https://centroidcncforum.com/viewtopic. ... dle#p76339
https://centroidcncforum.com/search.php ... %2Bspindle
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.

Top
Gary Campbell
Posts: 2363
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: Yes
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Bergland, MI, USA
Contact:
Contact Gary Campbell

Re: Can Acorn use step and direction for spindle

Post by Gary Campbell »

Why not use a motor & drive designed for both velocity and position?

https://centroidcncforum.com/viewtopic.php?t=8812
GCnC Control
CNC Control & Retrofits
CNC Depot Modular ATC kits
https://www.youtube.com/user/Islaww1/videos

Top
Post Reply

Return to “Centroid Acorn CNC Controller”