Centroid Community CNC Support Forum

Thanks cncsnw!
I just changed the M92/Y to M91/Y and it moves the table forward as is normal. Sorry i've worked as a CNC machinist for almost 25 years, But it was Haas, Fanuc, and Milltronics. Never had a Centurion controller to work with till i bought one. Thank you for your unpaid work. Do you ...

So when I program let's say G1 X2. F10., and I am starting at X0, it should cut 2 inches toward the right edge of the part. But instead it is cutting 2 inches towards the left side like a mirror image.

Hello again.
Just finished my first paid program for my antique Bridgeport Series 1 CNC retrofit. When I program an X+ move I am used to the table moving left to right. On the CNC graphing program, it moves correctly. When I run it on the Centroid it runs opposite, right to left. Is this just an ...

Hello everyone,
When I started machining was February 2002. Just months after September 11, 2001. According to Haas, the company I worked for at the time, bought a mill that was on the first truck that left Haas since September 11th. I pretty much had to learn from looking at the 1 program the Haas ...

Now the last question I have is at the end of a program, how do i have the axis go to Z0 and the table come forward? I run a Milltronics mill every day and I give it a M6 return to tool change position and a G49G53 y0 to bring the table forward. What are the commands to do that in Centroid?

Sorry for the lack of info before. I have a Bridgeport Series 1 CNC R2E3 retro with a M400S controller, serial # 20551, CNC10 v1.51.
What do I need to change in this in this file for Y axis to come forward at homing?
Thanks!
Danny R

Hello again,
Thanks to CNCJEFF that solved my control not booting due to dead CMOS backup battery!

I have a programming question for everyone. When my machine homes out, z axis goes to the top position. X axis moves the table to the far left, but Y axis moves to the far back limit switch. Why ...

Hello again!
I had my Bridgeport Series 1 CNC with Centroid 10 V1.51 running great last April 2023. Then I went on a 3D printing bender until yesterday when I needed to use the mill again.
Turned on the main power on the back control panel and it all came to life, but the screen stayed dark ...

Ping appears to work, but controller isn't viable by the PC.

I'm still at it. Got an Ethernet crossover cable and tried it. The PC would show unknown network and diagnostics said no valid IP address.
Picked up a used router this morning for $4(yeah, I went over budget) and hooked it up. PC recognizes the router and shows it as a network, but the controller ...