VCP Set WCS Zero

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
slice
Posts: 13
Joined: Mon Mar 08, 2021 2:20 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

VCP Set WCS Zero

Post by slice »

Is it possible to have VCP buttons to set WCS x, Y, Z? I have been looking though the Operators Manual, The Macro Programming Manual and the VCP Manual and I'm not finding anything.

Top
tblough
Community Expert
Posts: 3559
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:
Contact tblough

Re: VCP Set WCS Zero

Post by tblough »

Yes. You can program any of the VCP buttons to do this. G92 X0 Y0 Z0 would set the current WCS to 0,0,0.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.

Top
slice
Posts: 13
Joined: Mon Mar 08, 2021 2:20 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: VCP Set WCS Zero

Post by slice »

Thank you Tom

Top
Post Reply

Return to “Centroid Acorn CNC Controller”