Relay Auto Square Schematic

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
jhnmdahl
Posts: 27
Joined: Mon Nov 04, 2024 4:19 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: C182115
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Relay Auto Square Schematic

Post by jhnmdahl »

The shared axis relay part of relay auto square schematic S15200 doesn't quite make sense to me. It looks like the step signals for Y axis drive 1 and Y axis drive 2 should be connected to the NC and center contacts of relay OUT8 rather than to the unused normally closed contacts of relays 6 and 7. Am I missing something, or is the schematic drawn wrong?

https://www.centroidcnc.com/dealersuppo ... 200.r3.pdf

Top
Centroid_Tech2
Posts: 119
Joined: Mon Mar 03, 2014 4:24 pm
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: Relay Auto Square Schematic

Post by Centroid_Tech2 »

Those connections were mislabeled at the drives. Thanks for pointing that out. I fixed the schematic.

https://www.centroidcnc.com/centroid_di ... term=15200
When requesting support READ THIS POST first. viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)

Top
Post Reply

Return to “Centroid Acorn CNC Controller”