Upgrading form Acorn to AcornSix for Closed loop axis

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
andrkorb
Posts: 49
Joined: Sat Jul 31, 2021 5:46 am
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 7804732D0434-050819202, 0008DC111213-0120230049
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Poland

Re: Upgrading form Acorn to AcornSix for Closed loop axis

Post by andrkorb »

suntravel wrote: ↑Thu Nov 14, 2024 2:40 pm
andrkorb wrote: ↑Thu Nov 14, 2024 2:16 pm scale TTL with converter TTL to RS422 will be working with AcornSix?
Acorn 6 needs clean RS422 signals if converted or not....

... if the converter is fast enough it will be ok.

For a clean fast and chatter free closed loop timing is very important.

Uwe
2Mhz could be fast enough?

Top
Post Reply

Return to “Centroid Acorn CNC Controller”