Possible to do Milling and Plasma on the same Acorn ?

All things related to the Centroid CNC Plasma systems, Hardware and Software.

Moderators: cnckeith, Joey

Post Reply
Quebecois_Sti
Posts: 23
Joined: Sun Mar 21, 2021 9:20 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 4469
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Beauce, Quebec, Canada

Possible to do Milling and Plasma on the same Acorn ?

Post by Quebecois_Sti »

Hello,

I am buying a router table soon that I will convert to plasma.

I am wondering if it's possible to do milling and plasma on the same Acorn controller ? I will do a special modified Z and special removable table.

Is it only a matter of using different software License ?

Eg. Depending what I want to do, I open Milling software or Plasma software ?

I am o.k. to buy both licences (Mill + Plasma)

Best regards
“Better to try and fail than not to try at all.” -Nicole Krauss
AXYZ Millennium router CNC: https://goo.gl/gxvdcA
Glass cutting CNC table: https://goo.gl/VrDqGD

Top
cnckeith
Site Admin
Posts: 9113
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Possible to do Milling and Plasma on the same Acorn ?

Post by cnckeith »

yes, no problem.
yep you will need both license files, Router Pro or Mill Pro and Plasma Pro.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63

Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “CNC Plasma”