License install issue <resolved>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
cnckeith
Site Admin
Posts: 9067
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: License install issue

Post by cnckeith »

dxf import was disabled in some older revs while we did some improvement work on it that may be where the confusion came from. thanks, k
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63

Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
jhelgesen1
Posts: 18
Joined: Wed Apr 15, 2020 2:37 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3031
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: License install issue <resolved>

Post by jhelgesen1 »

Made a new post for the DXF access issue
Thanks
JH

Top
Post Reply

Return to “Centroid Acorn CNC Controller”