Linux to windows

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Anthony
Posts: 13
Joined: Thu Nov 30, 2017 12:50 pm
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: (0616102337)
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Linux to windows

Post by Anthony »

How can I put the centroid program on a Windows computer instead of linux?or should I keep and learn how to use linux?
Attachments
report.txt
(92.34 KiB) Downloaded 90 times

Top
cnckeith
Site Admin
Posts: 9075
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Linux to windows

Post by cnckeith »

Hello. There are several upgrade paths. looks like you are running a cpu7 isa card with CNC10 software from the report.txt file (thanks)
if you want to run windows the system will require a new CNC CPU card that uses the ethernet cable to communicate with the CNC PC rather than plugging into the motherboard ISA slot like the CPU7 card does. here is a link to more info on the legacy upgrade path to MPU11/ and Windows 7 based CNC11 or now available Windows 10 based CNC12. http://www.centroidcnc.com/downloads/mp ... cy_add.pdf
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63

Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “Centroid Oak, Allin1DC, MPU11 and Legacy products”