Can’t access Intercon from CNC12 screen

[_Doug]

Hi,
Newbie ? again/or help
#1—- No access to Intercon from main screen (Cam buttonF/5)? All the keyboard F-1 >F-12 only access windows functions . That’s not the biggest issue it’s mainly that the Cam button is non responsive.
#2 —- When I go into Intercon and want to post a project, screen comes up saying that there are to many events for a" free license”, I purchased the pro license and it seems to be Ok in CNC12?
Is there another up charge to unlock using Intercon on larger projects?
Thanks Doug

[centroid467]

#1 - The first issue could very well be Operating System focus. Try clicking (or tapping if touch screen) within the blue CNC12 window and see if that gets the F keys controlling CNC12.

#2 - Does that message go away when you open Intercon from within CNC12? Anyway, please post a fresh report so we can confirm your license is installed correctly and so on.

[_Doug]

Hi ,
Tappiing on within cnc12 window didn't do anything. And message doesn't go away when opened from cnc12
Thanks

[Sword]

For #1, look for a FN Key toggle on your keyboard. There should be a FN key that you would have to hold down when pressing the F1-F12 keys, and there may also be a FN key lock to keep it as function keys. Your keyboard may have some software that allows for changing this as well, along with the possibility of some special key assignments.

[cnckeith]

i moved this thread into the plasma forum.

[_Doug]

Hi,
I reinstalled the License file and that solved the error message re: No license.
#1 issue is still there …..even by holding the Fn key and selecting an F key, screen just flickers once.
Thanks ….