Replaced a FANUC 5T with a Centroid T400 on big Flat Bed Lathe
Reused the old Fanuc/Gettys black cap servo motors and ran with the new Centroid AC/DC drives. Still have to make some cover plates for the operator panel, and fix spindle encoder , but machine is alive now after collecting cobwebs with the 5T control...
Replaced a FANUC 5T with a Centroid T400 on big Flat Bed Lathe
Moderator: cnckeith
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Replaced a FANUC 5T with a Centroid T400 on big Flat Bed Lathe
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html