Arrow Controls Devlieg Horizontal Retrofit - Took off an unfriendly Dynapath Control and put on a Centroid M400 using a OAK board, PLC1616ADD IO and reusing the existing Allen Bradley AC servo drives and AB DC spindle drive.
Finishing up on a retrofit using scale feedback. Initial testing showed axis had .002 to .0075 slop. After turning on and setting up scales we were positioning to less than .0002.
Devlieg Horizontal Retrofit - Took off an unfriendly Dynapath Control and put on a Centroid M400 using a OAK board
Moderator: cnckeith
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Devlieg Horizontal Retrofit - Took off an unfriendly Dynapath Control and put on a Centroid M400 using a OAK board
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 62
- Joined: Mon Jun 29, 2020 6:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
Re: Devlieg Horizontal Retrofit - Took off an unfriendly Dynapath Control and put on a Centroid M400 using a OAK board
Awesome. Love seeing these machines. Royal Oak MI right around the corner from me.