Acorn relay board LED's(Resolved)

[marks3465]

When I power up my Acorn board all the LED's light up except output 1. Also when I assign something to it like servo brake release it turns green but I don't hear a click sound. All the other outputs make a click sound when activated.

[martyscncgarage]

When I power up my Acorn board all the LED's light up except output 1. Also when I assign something to it like servo brake release it turns green but I don't hear a click sound. All the other outputs make a click sound when activated.IMG_0469 (1).jpg

Not enough information.
Need a screen shot of your input output screen please.

Use a meter to check continuity between the relay contacts. That will surely tell you the state of the relay.

[cnckeith]

do the LED's on the Acorn output match the relay 8 board? show photo of the acorn board as well. with the relay 8 module.

viewtopic.php?f=61&t=1460&p=27217&hilit=led#p27217

[marks3465]

I checked number 1 output with a meter and the relay is stuck. Centroid is sending me another one.

[cnckeith]

great, use the new board with the Acorn and then you can use the other 7 good relays on the bad board for other things so don't toss it.

[marks3465]

I was surprised they didn’t want me to send it back.