Centroid Community CNC Support Forum

I am running 4.18, and I'm running the auto square routine.
I made a edit to my cncm.hom file
I added the following
;======================
G1 X 1.096 Y 4.678
m26/X
M26 /Y
;=======================

This just sets my machine zero at table zero.
I have the wizard set to custom home file but every time it seems acorn resets and overwrites my cncm.hom
any help?

Jerry

need a fresh report.zip and screen shot of wizard homing menu.
i just retested on my machine.. and it doesn't overwrite my home program.. so need more info on your system to provide tech support. viewforum.php?f=63

report and screen cap

thanks...put HomeAll on input one, and SlavedHomeInput on input two and it will not overwrite the home program.

changes made, Still overwriting my home file, when I go in to wizard, and I do have use custom home file set.
also sometimes the wizard will set my limits to zero.. strange...

jerry

Can you set up TeamViewer 12?