Centroid Community CNC Support Forum

Ok guys, my virtual e stop has stopped working?? I'm just bench testing at the moment not sure what I may have done but my mechanical estop is working but not on my control panel ?? Any help or ideas would be much appreciated

Baddad1911 wrote: ↑Fri Aug 24, 2018 11:06 am Ok guys, my virtual e stop has stopped working?? I'm just bench testing at the moment not sure what I may have done but my mechanical estop is working but not on my control panel ?? Any help or ideas would be much appreciated

More info please.
Touch screen? If so, can you unplug the USB cable from the monitor and try and click on the virtual Estop button on the Virtual Control Panel and see if mouse clicking it works?

Marty

Ok Marty, yes a touchscreen, a planar pct2235 , virtual estop doesnt work in any manner, it did when I first got everything hooked up but not now, I'm using a lenovo tiny as my computer also
Thanks Billy
https://youtu.be/HXO_bze6ACk

Baddad1911 wrote: ↑Sat Aug 25, 2018 6:24 pm Ok Marty, yes a touchscreen, a planar pct2235 , virtual estop doesnt work in any manner, it did when I first got everything hooked up but not now, I'm using a lenovo tiny as my computer also
Thanks Billy
https://youtu.be/HXO_bze6ACk

You aren't hitting the Estop button. You are pressing an All Stop button. The virtual
Estop is that BIG red button underneath the All Stop button that you are pushing in your video...says RESET

Look up the function of the red stop button in the Mill or lathe user manual
Marty

Ok Thanks Marty, sorry to waste your time, but thank you for setting me straight, a ton of information and my computer skills are to say the least elementary

Baddad1911 wrote: ↑Sat Aug 25, 2018 8:41 pm Ok Thanks Marty, sorry to waste your time, but thank you for setting me straight, a ton of information and my computer skills are to say the least elementary

Not a problem!!