SWI Trak 1745P (LX2) and older Centroid M400 componenets
Posted: Wed Aug 13, 2025 12:15 pm
Most of the leftovers from the M400 upgrade are listed, (I have all 3 servo motors, but only one is listed).
I have the computer and servo drives from a SWI TRL1745P Lathe that can be bought as well if you need them for repairs or backups. (the Trak computer doesn't boot: for parts/repair only, however both x and z servo drives are here, and should be in fine working order.)
https://www.ebay.com/usr/hbur4754
If any of you all want any of this stuff, there will be a generous 'Centroid Friends and Family" discount applied...
PM me with any questions.
I have the computer and servo drives from a SWI TRL1745P Lathe that can be bought as well if you need them for repairs or backups. (the Trak computer doesn't boot: for parts/repair only, however both x and z servo drives are here, and should be in fine working order.)
https://www.ebay.com/usr/hbur4754
If any of you all want any of this stuff, there will be a generous 'Centroid Friends and Family" discount applied...
PM me with any questions.