Page 6 of 6
Re: CHIPS (CNC12 Highly Intuitive Probing System). The must have Add-On for CNC12
Posted: Fri Jan 10, 2025 1:58 am
by mobilemcclintic
Making progress. Touch Probe is working, tool touchoff is working, plate is working. I am not adventurous enough to test one touching off the other yet, though I have seen the relevant thread. I appreciate your help, Swissi!
Re: CHIPS (CNC12 Highly Intuitive Probing System). The must have Add-On for CNC12
Posted: Tue May 20, 2025 2:25 pm
by Adaptel
Hello,
I'm a noob setting up CHIPS on my latest CNC12 Router Pro edition for my 60x96 shopbot PRS Alpha with 16 tool ATC (fork style) and is running on an Acorn controller. My machine also has a pneumatically deployable diode laser and a pneumatically deployable tangential cutter knife on the Z axis.
I am confused as to the best way to put the machine into "laser mode" and "tangential cutting mode" but I really would like to assign the laser to tool #99 and the t-knife to tool #98. No tool needs to be in the router spindle for the laser or knife to be used so I figured the best way to configure for laser cutting would be to call T99 which should unload the router spindle, deploy the laser, and prepare it to be commanded to cut.
Where is the best place to write the macro code for this functionality? In M6 macro? Are there any examples out there on doing this. I believe that AVID machines use this method for setting up "laser mode", but not sure.
Also, if I wanted to unload the router spindle of all tools, without activating laser or knife, I thought that by doing a tool change with tool #0 would be the obvious way but it doesn't work. How can I enable being able to put all the tools back in the rack. Thanks in advance!
Re: CHIPS (CNC12 Highly Intuitive Probing System). The must have Add-On for CNC12
Posted: Wed May 21, 2025 10:00 am
by swissi
Adaptel wrote: ↑Tue May 20, 2025 2:25 pm
Hello,
I'm a noob setting up CHIPS on my latest CNC12 Router Pro edition for my 60x96 shopbot PRS Alpha with 16 tool ATC (fork style) and is running on an Acorn controller. My machine also has a pneumatically deployable diode laser and a pneumatically deployable tangential cutter knife on the Z axis.
I am confused as to the best way to put the machine into "laser mode" and "tangential cutting mode" but I really would like to assign the laser to tool #99 and the t-knife to tool #98. No tool needs to be in the router spindle for the laser or knife to be used so I figured the best way to configure for laser cutting would be to call T99 which should unload the router spindle, deploy the laser, and prepare it to be commanded to cut.
Where is the best place to write the macro code for this functionality? In M6 macro? Are there any examples out there on doing this. I believe that AVID machines use this method for setting up "laser mode", but not sure.
Also, if I wanted to unload the router spindle of all tools, without activating laser or knife, I thought that by doing a tool change with tool #0 would be the obvious way but it doesn't work. How can I enable being able to put all the tools back in the rack. Thanks in advance!
Please email me a fresh report file of your CNC12 installation and also include a copy of the CHIPS configuration file (C:\cncm\CHIPS\CHIPS.cfg) so I can give you the best advice on how to integrate the functionality you are seeking.
-swissi
Re: CHIPS (CNC12 Highly Intuitive Probing System). The must have Add-On for CNC12
Posted: Sat Jun 07, 2025 7:26 pm
by Bigtimeb
Swissi'
I sent you an email inquiring about upgrading? Please check your spam folder for me. I would really like to upgrade.
Re: CHIPS (CNC12 Highly Intuitive Probing System). The must have Add-On for CNC12
Posted: Mon Jun 09, 2025 6:27 pm
by swissi
Bigtimeb wrote: ↑Sat Jun 07, 2025 7:26 pm
Swissi'
I sent you an email inquiring about upgrading? Please check your spam folder for me. I would really like to upgrade.
If your name is Brian, I found your email in the spam folder and you should have a response from me. If you are not Brian, please send me a private message here with your email address.
-swissi
Re: CHIPS (CNC12 Highly Intuitive Probing System). The must have Add-On for CNC12
Posted: Fri Aug 01, 2025 8:51 pm
by 713cnc
Could we add a filter for all tools that are not empty? I would like to start numbering my twist drills at 100,101, 102..., Bull nose at 50, 51, ... Flat endmill at 10,11,.... but if I do this, I can't see them in CHIPS because they are too far down.
Is this a good place to put in feature requests or ideas, or should I do so on the github?
Thanks for all your work,
Chris