threading issues after update <not update related, resolved>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
cnckeith
Site Admin
Posts: 9067
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: threading issues after update

Post by cnckeith »

Mathes wrote: ↑Mon Sep 19, 2022 1:55 am Hello,
I found the reason., the encoder counts the ppr only during low speed correctly.
In high-speed mode the encoder counts wrong. Changing the encoder everything works well.
Thanks for your support.
Mathias
great, thanks for reporting back.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63

Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “Centroid Acorn CNC Controller”