Thanks I'll do it . Errors seem to be clear so far today. Rehomed it 20 times. I put a new belt on the Z drive. Seemed good but was a little oily and had some flex I could see on hard motions.Z home position random errors - ABS count error
Moderator: cnckeith
-
Titleiiarms
- Posts: 55
- Joined: Mon Jul 08, 2019 8:54 am
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: Z home position random errors - ABS count error
Thats too clean Thanks I'll do it . Errors seem to be clear so far today. Rehomed it 20 times. I put a new belt on the Z drive. Seemed good but was a little oily and had some flex I could see on hard motions.
Thanks I'll do it . Errors seem to be clear so far today. Rehomed it 20 times. I put a new belt on the Z drive. Seemed good but was a little oily and had some flex I could see on hard motions.Guy
Titleiiarms
Dilliner, PA
Titleiiarms
Dilliner, PA
(Note: Liking will "up vote" a post in the search results helping others find good information faster)