Page 2 of 2
Re: Umbrella ATC Guidance
Posted: Sun Jun 21, 2020 9:27 pm
by Gary Campbell
I've done a number of rotary carousels. Drive them with a stepper & gearbox
Re: Umbrella ATC Guidance
Posted: Mon Jun 22, 2020 12:36 am
by mick41zxr
I have done an ATC both ways, using the A Axis & stepper is by far the easiest.
Converted to Ether1616 control to allow use of A-Axis for future use. Both setups listed below with macros attached.
A-Axis
viewtopic.php?f=60&t=3172
Ether1616
viewtopic.php?f=60&t=3900&p=34421#p34421
This is by no means a definitive guide, both Marty & Gary have way more experience than me.
Regards,
Michael