CNC12 v4.14?

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
slodat
Posts: 795
Joined: Thu Apr 12, 2018 11:16 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: CNC12 v4.14?

Post by slodat »

It’s well documented in another thread but no acknowledgement by Centroid. That’s why I’m asking.

viewtopic.php?f=60&t=2193&start=20

It sure looks like I’m having the same problem. Not the point of this thread though. I have a thread about my random limit tripping.

Top
martyscncgarage
Community Expert
Posts: 9958
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: Yes
AcornSix CNC Controller: Yes
Allin1DC CNC Controller: Yes
Hickory CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Mesa, AZ

Re: CNC12 v4.14?

Post by martyscncgarage »

Gary Campbell wrote: ↑Fri Feb 01, 2019 9:21 pm
slodat wrote: ↑Fri Feb 01, 2019 9:17 pm I was a software engineer in a former life. It appears a software issue is poking its head on my machine.
Did you report the issue? If both of the above are true, then you know how this works: You report it, we make it repeatable, they fix it! :P
Couldn't have said it better meeself Gary. 😀
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ

Top
Post Reply

Return to “Centroid Acorn CNC Controller”