Page 2 of 5
Re: Software levels
Posted: Mon Aug 12, 2019 9:48 pm
by cnckeith
Proposed Oak and Allin1DC CNC12 pricing
CNC12 Free Level is Free
CNC12 Pro Level $549
CNC12 Ultimate Level $995
Proposed Plan for CNC12 v4.16 software upgrade from older versions of CNC10,CNC11,CNC12
1.) everyone can get Pro who is upgrading from cnc7,10,11, or cnc12 for $299 (this will be called "Legacy Software Upgrade" part #tbd )
2.) anyone who had a paid software option unlock that is in the Ultimate Level, will get the Ultimate Level with the $299 Legacy Software Upgrade.
3.) Anyone who bought an Oak/Allin1DC/Mpu11 within 18 months of this release will can purchase the Legacy Software Upgrade for $99, older than 18 months $299
4.) If someone purchases Pro then at a later date wants to upgrade to Ultimate they can get Ultimate for: $450
Draft PDF attached.
cnc12_servo_software_levels_v4.16_draft.pdf
Re: Software levels
Posted: Tue Aug 13, 2019 1:46 am
by converterking
Thank you. When will 4.16 be released?
Re: Software levels
Posted: Tue Aug 13, 2019 7:13 am
by Wolfenstien
converterking wrote: ↑Tue Aug 13, 2019 1:46 am
Thank you. When will 4.16 be released?
Poor Keith,
He probably knew that question was coming.
Second question for you Keith: Will the price of the Oak or ALL in one boards be changing with the new software level release?
Thank you,
Re: Software levels
Posted: Tue Aug 13, 2019 8:45 am
by cnckeith
Wolfenstien wrote: ↑Tue Aug 13, 2019 7:13 am
converterking wrote: ↑Tue Aug 13, 2019 1:46 am
Thank you. When will 4.16 be released?
<< as soon as possible>>
Poor Keith,
He probably knew that question was coming.
Second question for you Keith: Will the price of the Oak or ALL in one boards be changing with the new software level release?
<< yes>>
Thank you,
Re: Software levels
Posted: Tue Aug 13, 2019 9:42 am
by converterking
Proposed Plan for CNC12 v4.16 software upgrade from older versions of CNC10,CNC11,CNC12
1.) everyone can get Pro who is upgrading from cnc7,10,11, or cnc12 for $299 (this will be called "Legacy Software Upgrade" part #tbd )
Does this mean I can upgrade the software options on a cnc10 system?
Re: Software levels
Posted: Wed Aug 14, 2019 7:43 am
by Centroid_Liviu
converterking wrote: ↑Tue Aug 13, 2019 9:42 am
Proposed Plan for CNC12 v4.16 software upgrade from older versions of CNC10,CNC11,CNC12
1.) everyone can get Pro who is upgrading from cnc7,10,11, or cnc12 for $299 (this will be called "Legacy Software Upgrade" part #tbd )
Does this mean I can upgrade the software options on a cnc10 system?
The upgrade requires CNC12 v4.16, so you can upgrade to it but from a CNC7 / CNC10 system, but it will also require a hardware upgrade (a CNC7 /10 controller would not be compatible with CNC12).
Re: Software levels
Posted: Wed Aug 14, 2019 10:29 am
by converterking
Thanks for clarifying this. What would the probing option for a cmc10 cost without the probe?
Re: Software levels
Posted: Thu Aug 15, 2019 11:13 am
by AcornJosh
converterking wrote: ↑Wed Aug 14, 2019 10:29 am
Thanks for clarifying this. What would the probing option for a cmc10 cost without the probe?
Currently #13980 Probing Software $795. These prices should stay the same.
Re: Software levels
Posted: Thu Aug 15, 2019 3:30 pm
by converterking
Thank you
Re: Software levels
Posted: Mon Aug 19, 2019 1:15 pm
by Black Forest
cnckeith wrote: ↑Tue Aug 13, 2019 8:45 am
Wolfenstien wrote: ↑Tue Aug 13, 2019 7:13 am
converterking wrote: ↑Tue Aug 13, 2019 1:46 am
Thank you. When will 4.16 be released?
<< as soon as possible>>
Poor Keith,
He probably knew that question was coming.
Second question for you Keith: Will the price of the Oak or ALL in one boards be changing with the new software level release?
<< yes>>
Thank you,
Do you know what the prices will be on the Oak and Allin1 DC will be?