Page 2 of 2
Re: Upgrading form Acorn to AcornSix for Closed loop axis
Posted: Fri Nov 15, 2024 1:29 pm
by andrkorb
suntravel wrote: ↑Thu Nov 14, 2024 2:40 pm
andrkorb wrote: ↑Thu Nov 14, 2024 2:16 pm
scale TTL with converter TTL to RS422 will be working with AcornSix?
Acorn 6 needs clean RS422 signals if converted or not....
... if the converter is fast enough it will be ok.
For a clean fast and chatter free closed loop timing is very important.
Uwe
2Mhz could be fast enough?