Centroid Community CNC Support Forum

Can I send the AcornSix in for this update.

Exhibitology wrote: ↑Fri May 03, 2024 9:36 am Can I send the AcornSix in for this update.

sure thing! please use RMA number 36920

ship to:

Centroid
Attn: RMA #36920
159 Gates Rd.
Howard, PA 16841

pack it well and insure the package.
be sure to let us know exactly where you want it shipped back to, and your cell phone number. send that info to support@centroidcnc.com
along with tracking number and reference the RMA #

and we will get you taking care of.

I eliminated the possibility there is a wiring issue preventing my AcornSix board from driving XA, XB, and Y axes. I did this by replacing the AcornSix with an AcornCNC board. I plugged the H1 and H2 open collector connectors on the AcornSix directly into the H2 and H3 connectors on the AcornCNC. I reloaded CNC12V5.10 and entered the exact same configuration except for inputs, outputs, and homing. I manually homed the machine and gave it MDI commands. Cofigured with the AcornCNC, there are no issues with the paired XA and XB axes and no issues with the Y axis at either low or high speeds.

I will drop the board in the mail on Monday and provide a tracking number.

Thanks

Rich