It is a minor thing but on the current rev of the Allin1DC DIY guide (link below) there an error on page 41. I references Appendix D for setting current limits for the servo motors but it should reference Appendix C which starts on Page 78.
http://www.centroidcnc.com/downloads/ce ... manual.pdf
Manual corrections for Allin1DC DIY Guide
Moderator: cnckeith
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Manual corrections for Allin1DC DIY Guide
thanks, the allin1dc users manual has been updated to v5.08 specs
refresh your browser to see the latest version with todays date.
https://www.centroidcnc.com/downloads/c ... manual.pdf
refresh your browser to see the latest version with todays date.
https://www.centroidcnc.com/downloads/c ... manual.pdf
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html