Relay board connections help

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

ScotY
Posts: 654
Joined: Sat Sep 23, 2017 7:57 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Honolulu, HI

Re: Relay board connections help

Post by ScotY »

Where are you guys buying those relay boards? A search on eBay brings some up, but not that exact one.


DICKEYBIRD
Posts: 536
Joined: Sat Jul 08, 2017 7:38 am
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: n/a yet
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Collierville, TN USA

Re: Relay board connections help

Post by DICKEYBIRD »

Here you go: **Deleted my original link** Screwed up yet again. The one I bought is in fact a 24v, 4 relay NPN & they were gone when I searched. My bad :oops:
Last edited by DICKEYBIRD on Sun Oct 29, 2017 11:31 am, edited 1 time in total.
Milton in Collierville, TN

"Accuracy is the sum total of your compensating mistakes."


martyscncgarage
Community Expert
Posts: 9958
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: Yes
AcornSix CNC Controller: Yes
Allin1DC CNC Controller: Yes
Hickory CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Mesa, AZ

Re: Relay board connections help

Post by martyscncgarage »

ScotY wrote: Sun Oct 29, 2017 3:31 am Where are you guys buying those relay boards? A search on eBay brings some up, but not that exact one.
Note: The eBay auction Dickeybird refers to has 5vdc coils. Which is fine if you are going to use a 5vdc power supply to drive them.

MDFly is a great seller, but he runs out of them quickly. I emailed him and asked him to stock more and he did, but they still go fairly fast. He sells on Amazon too. They also have a web site. Google search MDFly.
He said he should have more in a couple weeks. He currently has two left on eBay, as of yesterday he had two on Amazon. He said he would try and stock a larger quantity.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ


frijoli
Posts: 595
Joined: Tue Sep 12, 2017 10:03 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 1030090099
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Location: Outside Winston-Salem, NC
Contact:

Re: Relay board connections help

Post by frijoli »

martyscncgarage wrote: Sun Oct 29, 2017 5:37 am
ScotY wrote: Sun Oct 29, 2017 3:31 am Where are you guys buying those relay boards? A search on eBay brings some up, but not that exact one.
Note: The eBay auction Dickeybird refers to has 5vdc coils. Which is fine if you are going to use a 5vdc power supply to drive them.

MDFly is a great seller, but he runs out of them quickly. I emailed him and asked him to stock more and he did, but they still go fairly fast. He sells on Amazon too. They also have a web site. Google search MDFly.
He said he should have more in a couple weeks. He currently has two left on eBay, as of yesterday he had two on Amazon. He said he would try and stock a larger quantity.
Marty
I ordered one of the last two from amazon. He has one left as of now. https://smile.amazon.com/gp/product/B07 ... UTF8&psc=1
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/


ScotY
Posts: 654
Joined: Sat Sep 23, 2017 7:57 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Honolulu, HI

Re: Relay board connections help

Post by ScotY »

Cool, thanks. Got one on order.


Post Reply