CNC12 v5.1 RC#6 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
Models: Acorn, AcornSix, Hickory, Oak, Allin1DC, MPU11
Download link
https://centroid-support.filemail.com/d ... 63393e70b5
changes from RC5
Fixed M115 not stopping when a TT is tripped when a NC Probe without a detect is connected and detect probe via tool number is turned on
CNC12 v5.1 RC#6 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
Moderator: cnckeith
-
- Posts: 7411
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
CNC12 v5.1 RC#6 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 107
- Joined: Fri Dec 25, 2020 2:06 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 v5.1 RC#6 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
Here the new report after the installation of 5.1 cnc12.
At this time didn't test the system for trouble .
Is there something rongh with the report ?
do understand that line? in previous message.
(Fixed M115 not stopping when a TT is tripped when a NC Probe without a detect is connected and detect probe via tool number is turned on)
At this time didn't test the system for trouble .
Is there something rongh with the report ?
do understand that line? in previous message.
(Fixed M115 not stopping when a TT is tripped when a NC Probe without a detect is connected and detect probe via tool number is turned on)
- Attachments
-
- report_E415F6F138CC-1119204064_2024-04-17_10-14-08.zip
- (900.42 KiB) Downloaded 2 times
-
- Posts: 107
- Joined: Fri Dec 25, 2020 2:06 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 v5.1 RC#6 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
Ok as this moment nothing as change .the axe that are plugin are moving as soon the power arrive.
need help .
thanks
need help .
thanks
-
- Posts: 7411
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 v5.1 RC#6 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
is this the sigma 2 system? need photos and more information to help.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 107
- Joined: Fri Dec 25, 2020 2:06 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 v5.1 RC#6 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
SIGMA 2 SYSTEM ???
acorn centroid with delta asda-b2 wiring system problem .
went cnc 12 and acorn is open , and I power up the the motor drive the x and z (only 2 axes are powered up for now) the motor start moving by it self.
What rough with acorn???
acorn centroid with delta asda-b2 wiring system problem .
went cnc 12 and acorn is open , and I power up the the motor drive the x and z (only 2 axes are powered up for now) the motor start moving by it self.
What rough with acorn???
-
- Posts: 7411
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 v5.1 RC#6 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
hi,
disconnect all but one delta drive from the Acorn.
enter delta asda software and perform a factory reset of the parameters.
confirm factory reset.
enter acorn delta parameters
confirm correct parameters
jog motor with asda software.
power cycle delta drive.
then test with Acorn
https://centroidcncforum.com/viewtopic. ... 724#p86724
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html