CNC12 v5.1 RC#5 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
Moderator: cnckeith
-
- Posts: 7424
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
CNC12 v5.1 RC#5 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
CNC12 v5.1 RC#5 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
Models: Acorn, AcornSix, Hickory, Oak, Allin1DC, MPU11
Download link
https://centroid-support.filemail.com/d/awgpjertgujoqmq
Differences from RC4
- Added to the Wizard Tool Touch Off device setup menu choices between the two main methods of measuring tool height offsets. Reference Tool method OR Z ref = Z home method.
- Added to the Wizard Touch Probe setup menu the ability to enable/disabled the new Probe Protection feature based on Tool number.
Models: Acorn, AcornSix, Hickory, Oak, Allin1DC, MPU11
Download link
https://centroid-support.filemail.com/d/awgpjertgujoqmq
Differences from RC4
- Added to the Wizard Tool Touch Off device setup menu choices between the two main methods of measuring tool height offsets. Reference Tool method OR Z ref = Z home method.
- Added to the Wizard Touch Probe setup menu the ability to enable/disabled the new Probe Protection feature based on Tool number.
- Attachments
-
- cnc12_v5.1_release_notes.pdf
- (864.44 KiB) Downloaded 30 times
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 110
- Joined: Sun Nov 12, 2023 1:33 pm
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A901313
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Switzerland
Re: CNC12 v5.1 RC#5 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
Added to the Wizard Touch Probe setup menu the ability to enable/disabled the new Probe Protection feature based on Tool number
How would that work for the oak since no wizard is possible. Is the entry in the parameters enough?
How would that work for the oak since no wizard is possible. Is the entry in the parameters enough?
-
- Posts: 93
- Joined: Thu Sep 21, 2023 9:24 am
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 v5.1 RC#5 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
An additional bit was added to the bit-mapped parameter 3. "Add 16: Probe Protection based on Tool Number"Houseman303 wrote: ↑Wed Apr 10, 2024 4:34 am Added to the Wizard Touch Probe setup menu the ability to enable/disabled the new Probe Protection feature based on Tool number
How would that work for the oak since no wizard is possible. Is the entry in the parameters enough?
Domenic
When requesting support READ THIS POST first.
Please ALWAYS post a FRESH report.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
When requesting support READ THIS POST first.
Please ALWAYS post a FRESH report.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 110
- Joined: Sun Nov 12, 2023 1:33 pm
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A901313
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Switzerland
-
- Posts: 7424
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 v5.1 RC#5 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
Yes, (the wizard sets cnc12 parameters).Houseman303 wrote: ↑Wed Apr 10, 2024 4:34 am Added to the Wizard Touch Probe setup menu the ability to enable/disabled the new Probe Protection feature based on Tool number
How would that work for the oak since no wizard is possible. Is the entry in the parameters enough?
any new parameters will be added to the operator manual with description on how to use them.
side note, if you wonder what parameter/file the wizard is setting press ALT P on any screen and they will be displayed.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 130
- Joined: Fri Aug 13, 2021 12:25 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: E062346A1C67-0716214939
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: New York
Re: CNC12 v5.1 RC#5 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
Trying out 5.1 RC5 today.
Auto Z to plate not working.
I have a NC TT device setup in the wizard as mechanical, input state when triggered=open
This shows to be working correctly in the diagnostic screen, however when using auto z to plate it doesn't work. Z keeps moving until it triggers the over travel switch in the device that I have tied into my estop. It does indeed trigger the input LED though.
Bill
Auto Z to plate not working.
I have a NC TT device setup in the wizard as mechanical, input state when triggered=open
This shows to be working correctly in the diagnostic screen, however when using auto z to plate it doesn't work. Z keeps moving until it triggers the over travel switch in the device that I have tied into my estop. It does indeed trigger the input LED though.
Bill
-
- Posts: 135
- Joined: Wed Jul 31, 2019 12:53 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: CNC12 v5.1 RC#5 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
Hello,avp wrote: ↑Wed Apr 10, 2024 3:11 pm Trying out 5.1 RC5 today.
Auto Z to plate not working.
I have a NC TT device setup in the wizard as mechanical, input state when triggered=open
This shows to be working correctly in the diagnostic screen, however when using auto z to plate it doesn't work. Z keeps moving until it triggers the over travel switch in the device that I have tied into my estop. It does indeed trigger the input LED though.
Bill
report_E062346A1C67-0716214939_2024-04-10_15-03-46.zip
Appreciate the report, looking into it this does appear to be a wizard issue. A quick work around is to set Parameter 406 = 0 or go into the wizard and set the Probe to Closes when tripped instead of Open (even though you do not have a probe). Should be resolved in the next version.
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Centroid PLC Tutorial Videos
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Centroid PLC Tutorial Videos
-
- Posts: 130
- Joined: Fri Aug 13, 2021 12:25 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: E062346A1C67-0716214939
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: New York
Re: CNC12 v5.1 RC#5 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
Hello,
Ok, setting Par 406 to 0 did the trick. Wizard writing issue I guess.
Thank you
Bill
Ok, setting Par 406 to 0 did the trick. Wizard writing issue I guess.
Thank you
Bill
-
- Posts: 130
- Joined: Fri Aug 13, 2021 12:25 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: E062346A1C67-0716214939
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: New York
Re: CNC12 v5.1 RC#5 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
Character display problem now. Same version 5.1RC5
-
- Posts: 7424
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 v5.1 RC#5 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
thanks, please post a fresh report.zip so we can see your various selections (RTG on/off) etc..
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html