Uwe
CNC lathe Dealing with long chips
Moderator: cnckeith
-
suntravel
- Posts: 2102
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: CNC lathe Dealing with long chips
for boring bars and straight holes, you can misuse peck drilling
Uwe
Uwe
-
RC-Lights
- Posts: 47
- Joined: Sat Jan 21, 2023 6:20 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0008DC111213-1005220061
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC lathe Dealing with long chips
Hi Uwe, thanks for the hint. Right now i am testen Parameters for All Materials and i found out, that with f0,3 i can Break the Chips also in titanium.
Michael
Michael
-
suntravel
- Posts: 2102
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: CNC lathe Dealing with long chips
Jep faster cutting is in most cases better.
Made a video to compare pecking with fast cutting:
Uwe