SheetCam Hypertherm 45XP .tool file (inch)
-
fschonig
- Posts: 1
- Joined: Sun Nov 27, 2022 11:10 am
- Acorn CNC Controller: Yes
- Plasma CNC Controller: Yes
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: Yes
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: A900723, Acorn 6964
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
SheetCam Hypertherm 45XP .tool file (inch)
I'm looking to download the SheetCam Hypertherm 45XP .tool file (inch) can someone point me in the correct direction?
-
Joey
- Posts: 522
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: SheetCam Hypertherm 45XP .tool file (inch)
Acorn Plasma Takes care of any ''Tool'' settings. Acorn Plasma comes with all default Profiles from Hypertherm.
Acorn Plasma does not use any of the tool information from Sheetcam .
Sheetcam Has a forum if you really want the Sheetcam toolset.
Acorn Plasma does not use any of the tool information from Sheetcam .
Sheetcam Has a forum if you really want the Sheetcam toolset.