Attached is a new report.
I checked Windows zoom level. It is on 150%. I set it back to 100% and the G code display came right. But everything else in Windows is too small to see or press with my fat fingers! So, I would like to run Windows at 150%. This is a full touchscreen only setup, no mouse or keyboard. Has worked great for years. The rest of CNC12 works fine at 150%
Another question I have is why are the new G codes inconsistent with the rest of CNC 12? The font is different. And the heading is black text in a white block, whereas every other heading is plain blue text. The text is not vertically centered in the solid blocks.
Some time ago, I spent four years working writing high performance manually drawn GUI code for Windows. So unfortunately, it is an area I am a bit picky about.
This screen shot shows the entire screen at 150%
This one is at 100%.
CNC12 5.08 Upgrade Issues
Moderator: cnckeith
-
- Posts: 401
- Joined: Thu Dec 03, 2020 4:54 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 5.08 Upgrade Issues
- Attachments
-
- report_0008DC111213-1214201066_2024-01-19_18-44-46.zip
- (2.81 MiB) Downloaded 21 times
-
- Posts: 7427
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 5.08 Upgrade Issues
the way the active g code is displayed in cnc12 was re written and looks like it was not tested with windows set to 150% test size.
i'll see what we can do.
i'll see what we can do.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 401
- Joined: Thu Dec 03, 2020 4:54 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 5.08 Upgrade Issues
Any updates on this?