Centroid CNC12, CNC11 & CNC10 Manuals
Moderator: cnckeith
-
- Posts: 111
- Joined: Tue Aug 14, 2018 10:49 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: noneC120192
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Denver, CO
Re: Centroid CNC11 & CNC10 Operator Manuals
Tom,
I just found this - THANKS for the hard work on both user manuals.
They are much easier to use now.
Gary
I just found this - THANKS for the hard work on both user manuals.
They are much easier to use now.
Gary
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Centroid CNC11 & CNC10 Operator Manuals
They are on the Acorn resource page too, scroll down:
https://www.centroidcnc.com/centroid_di ... oller.html
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 16
- Joined: Sat Jan 02, 2021 3:39 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 30030
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Centroid CNC12, CNC11 & CNC10 Manuals
I am looking for CNC10 Lathe Manuals, The title of this thread would suggest that should be here, I have searched and searched and so far I cant find it, Am I just missing a link somewhere?
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Centroid CNC12, CNC11 & CNC10 Manuals
Very bottom of this page I think:
https://www.centroidcnc.com/centroid_di ... nuals.html
https://www.centroidcnc.com/centroid_di ... nuals.html
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 16
- Joined: Sat Jan 02, 2021 3:39 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 30030
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Centroid CNC12, CNC11 & CNC10 Manuals
I looked and looked, I have no idea how I missed that, thank you.
-
- Posts: 4
- Joined: Wed Aug 19, 2020 5:12 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: NH
Re: Centroid CNC12, CNC11 & CNC10 Manuals
I noticed there is a pinned topic for setting up a touch probe and tool set for the acorn, is there one for the "All In One"? Is there a setup.pdf for the AIO? Has the wizard been incorporated into the AIO software?
Thank you,
Mike
Thank you,
Mike
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Centroid CNC12, CNC11 & CNC10 Manuals
No wizard for servo.
For AIO DC , buy the bulkhead cable, plug it into all AIO DC plug in KP-3 or TT-1B follow their manuals and you'll be good to go. You can find everything on these pages:
https://www.centroidcnc.com/centroid_di ... oller.html
https://www.centroidcnc.com/centroid_di ... nuals.html
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 9
- Joined: Sun Oct 07, 2018 1:10 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: K21145
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: Yes
Re: Centroid CNC12, CNC11 & CNC10 Manuals
Is there a manual for the RT120 available?
Thanks,
Mike
Thanks,
Mike
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Centroid CNC12, CNC11 & CNC10 Manuals
Perhaps its close to the RT150?
You can find a manual here for it:https://www.centroidcnc.com/centroid_di ... nuals.html
otherwise, email support@centroidcnc.com with the serial number.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 9
- Joined: Sun Oct 07, 2018 1:10 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: K21145
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: Yes
Re: Centroid CNC12, CNC11 & CNC10 Manuals
I did download the RT150, was just checking about the RT120. Thank you for the email link.
Mike
Mike