Got the Hunyang vfd drive installed.
Machine spindle is running again.
couple of odd things noticed and not sure why:
1, My air operated brake does not release now with S command, stays locked. Not sure why it is not releasing. I removed air pressure for now.
2, The vcp wont let me change incrementaly, it is on .001 and i cant select either of the two vcp buttons.
Other than that seems to be back in business.
Any suggestions would be appreciated.
Help with Allin1dc CNC11 to CNC12 upgrade
Moderator: cnckeith
-
- Posts: 41
- Joined: Mon Apr 09, 2018 6:59 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Outside Boston
Re: Help with Allin1dc CNC11 to CNC12 upgrade
Re item 2: My VCP won’t let me change increment amounts either; this is one of the last issues I need to fix on my recent installation. I’ve been getting around it by using alt-j and changing it on the keyboard.
Sam
Sam
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Help with Allin1dc CNC11 to CNC12 upgrade
If you guys have wireless MPG's this is by design.Samandkimberly wrote: ↑Mon Jan 28, 2019 8:38 am Re item 2: My VCP won’t let me change increment amounts either; this is one of the last issues I need to fix on my recent installation. I’ve been getting around it by using alt-j and changing it on the keyboard.
Sam
Use the MPG or turn off the MPG and use VCP. Can't do both.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 41
- Joined: Mon Apr 09, 2018 6:59 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Outside Boston
Re: Help with Allin1dc CNC11 to CNC12 upgrade
Hi Marty,
I don’t have the wireless MPG, but I’ll check the settings...maybe it’s turned on and I don’t know it. But everything else on the VCP works normally; wouldn’t that affect more than just the increment amount buttons?
Sam
I don’t have the wireless MPG, but I’ll check the settings...maybe it’s turned on and I don’t know it. But everything else on the VCP works normally; wouldn’t that affect more than just the increment amount buttons?
Sam
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Help with Allin1dc CNC11 to CNC12 upgrade
No, its a specific issue we were testing disregard if no wireless MPG.Samandkimberly wrote: ↑Wed Jan 30, 2019 10:27 pm Hi Marty,
I don’t have the wireless MPG, but I’ll check the settings...maybe it’s turned on and I don’t know it. But everything else on the VCP works normally; wouldn’t that affect more than just the increment amount buttons?
Sam
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ