Centroid Community CNC Support Forum

Got a new toy a, portable 15.6 Touchscreen

https://www.uperfectmonitor.com/collect ... nitor-15-6

Got one new from ebay for 169 bucks.

This thing works perfectly, only one USB-C kable, or HDMI and USB. Plug and play no installation.

Would be fine as single Monitor too. Touch is ok with 5 point multi function for zoom ect.

Great for me ist to have manuals on side of the main screen, or to edit g-code, run the PLC-Detective....

Colors and contrast are very good, only that it is reflective is not my preference.

Uwe

I have an old Kindle Fire tablet that I keep by the machine with PDFs of all my shop manuals. Much easier to search a PDF for keywords than a printed manual

I have a Changingtouch portable monitor(https://store.changingtouch.com/products/x14-lite) that I put next to my rogally, and it can be used with just a simple cable connection. It works well, doesn’t have a cheap plastic feel, the only downside is that it doesn’t have touch functionality. But most of the time I use it to connect to my rogally.