Good morning,
I just received my tth-4 for a cnc lathe and I wanted to know how to start with tools number one, step number one is it the part with reference?
if anyone has a how to do it i'm a taker.
and also for a boring bar how do we do it?
thank you very much and sorry for my bad english.
TT-4 on lathe how to start
Moderator: cnckeith
-
slodat
- Posts: 793
- Joined: Thu Apr 12, 2018 11:16 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: TT-4 on lathe how to start
I bought the lathe TT-4 for my lathe as well. Spend many hours trying to get it working reliably and finally gave up. Interested to see if you have better luck with it.
-
cnckeith
- Posts: 7424
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: TT-4 on lathe how to start
please post a fresh report.zip so we can see your setup.OptionSR wrote: ↑Mon Jul 10, 2023 10:19 am Good morning,
I just received my tth-4 for a cnc lathe and I wanted to know how to start with tools number one, step number one is it the part with reference?
if anyone has a how to do it i'm a taker.
and also for a boring bar how do we do it?
thank you very much and sorry for my bad english.
please post link to photo album so we can see your machine.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
cnckeith
- Posts: 7424
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: TT-4 on lathe how to start
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
cnckeith
- Posts: 7424
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: TT-4 on lathe how to start
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
OptionSR
- Posts: 8
- Joined: Tue Jan 08, 2019 7:09 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA7F7773-1218181466
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Canada
- Contact:
Re: TT-4 on lathe how to start
hi,
report in attachments and picture here https://optionsr-my.sharepoint.com/:f:/ ... g?e=e7VxsS
thank you
report in attachments and picture here https://optionsr-my.sharepoint.com/:f:/ ... g?e=e7VxsS
thank you
- Attachments
-
- report_F045DA7F7773-1218181466_2023-07-10_11-02-08.zip
- (909.68 KiB) Downloaded 1 time
-
OptionSR
- Posts: 8
- Joined: Tue Jan 08, 2019 7:09 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA7F7773-1218181466
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Canada
- Contact:
Re: TT-4 on lathe how to start
hi Keith,
il already see video.
i'm ok to setup manual tools.
and video with tt-4 you start tools after tools one, how to setup tool one with tt-4 ? the order i need to start.
thank you.
il already see video.
i'm ok to setup manual tools.
and video with tt-4 you start tools after tools one, how to setup tool one with tt-4 ? the order i need to start.
thank you.
-
cnckeith
- Posts: 7424
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: TT-4 on lathe how to start
using tt-4 is just like manual measure.. same procedure.
use tt to set ref, then go measure the tools same, same
use tt to set ref, then go measure the tools same, same
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
OptionSR
- Posts: 8
- Joined: Tue Jan 08, 2019 7:09 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA7F7773-1218181466
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Canada
- Contact:
Re: TT-4 on lathe how to start
normaly i start whit part, touch z and set my z 0 after i select my x take slim cut mesure and set my x XX but no option for TT for x or z.
if i go to offset page and select tool one in x and select mesure x and select TT the TT start and mesure the size is not correct it's supose show 18.965 but it's show 16.65, i mesure with micrometer 18.965 and i put this number in config, i'm confuse,i start where part ou offset ? to have a good tools one.
ps: tt for lathe, good idee to have option to mesure tt probe as part and only touch Z when you load part.
if i go to offset page and select tool one in x and select mesure x and select TT the TT start and mesure the size is not correct it's supose show 18.965 but it's show 16.65, i mesure with micrometer 18.965 and i put this number in config, i'm confuse,i start where part ou offset ? to have a good tools one.
ps: tt for lathe, good idee to have option to mesure tt probe as part and only touch Z when you load part.
-
Jroberts
- Posts: 3
- Joined: Tue Mar 07, 2023 3:50 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: TT-4 on lathe how to start
Good Morning,
I have attached a new documentation for setting your Z ref on the lathe using a TT-4 or TT-2 tool touch-off.
Any feedback on our document is greatly appreciated.
Thanks in advance
I have attached a new documentation for setting your Z ref on the lathe using a TT-4 or TT-2 tool touch-off.
Any feedback on our document is greatly appreciated.
Thanks in advance
- Attachments
-
- Centroid CNC Lathe Z Ref touchoff (1).pdf
- (3.97 MiB) Downloaded 16 times