Calling tools with four digit number: T0101, T0202, etc.
Screen shows T00001, T0002, etc.
Lathe build thread is in my signature. It's a gang tool lathe. Wondering why it's not showing T0101, etc? It's working correctly. I ran a big batch of these parts without issue today. Just don't understand the way it's displaying the tool.
If I call T0101 in MDI, it stays T0001.
Acorn Lathe tool offset question
Moderator: cnckeith
-
slodat
- Posts: 793
- Joined: Thu Apr 12, 2018 11:16 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Acorn Lathe tool offset question
- Attachments
-
- LargePin_Thread.lth
- (2.97 KiB) Downloaded 1 time
-
- report_0CB2B7D9277B-0723203547_2023-07-01_18-10-36.zip
- (826.46 KiB) Not downloaded yet
-
lavrgs
- Posts: 533
- Joined: Sat Aug 11, 2018 11:22 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: Yes
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Oregon
Re: Acorn Lathe tool offset question
I think 99 is the max number of tools
My Tree J325 & Projectshttps://photos.app.goo.gl/LLHf8M84eQYwP3ph6
MAKING PARTS https://www.youtube.com/shorts/MSQ4TyTzFkk
Hardinge CHNC4 Retrofithttps://photos.app.goo.gl/244YnF9ykyUf7mfq7
MAKING PARTS https://www.youtube.com/shorts/MSQ4TyTzFkk
Hardinge CHNC4 Retrofithttps://photos.app.goo.gl/244YnF9ykyUf7mfq7