All things related to the Centroid Acorn CNC Controller
Moderator: cnckeith
cnckeith
Posts: 7424 Joined: Wed Mar 03, 2010 4:23 pmAcorn CNC Controller: YesAllin1DC CNC Controller: YesOak CNC controller: YesCNC Control System Serial Number: noneDC3IOB: YesCNC11: YesCPU10 or CPU7: Yes
Contact:
Post
by cnckeith Tue May 02, 2023 3:49 pm
******* UPDATE**********
now available.
https://shopcentroidcnc.com/shop/cnc-ac ... cover-kit/
Free shipping in USA.
(we are working on affordable shipping for International)
last week all new Acorn Kits ship with this cover. so no need to purchase this if you are ordering a new Acorn kit.
************
working on a clear acrylic cover for the Acorn pc board. the image below is a draft of the proposed Art to be silk screened on the underside of the clear plastic cover in white ink. comments?
Jerminator96
Posts: 24 Joined: Thu Apr 13, 2023 10:01 pmAcorn CNC Controller: NoAllin1DC CNC Controller: NoOak CNC controller: NoCNC Control System Serial Number: noneDC3IOB: NoCNC12: NoCNC11: NoCPU10 or CPU7: No
Post
by Jerminator96 Tue May 02, 2023 9:29 pm
I'd buy it
andrkorb
Posts: 43 Joined: Sat Jul 31, 2021 5:46 amAcorn CNC Controller: YesPlasma CNC Controller: NoAcornSix CNC Controller: NoAllin1DC CNC Controller: NoHickory CNC Controller: YesOak CNC controller: NoCNC Control System Serial Number: 7804732D0434-050819202, 0008DC111213-0120230049DC3IOB: NoCNC12: YesCNC11: NoCPU10 or CPU7: NoLocation: Poland
Post
by andrkorb Wed May 03, 2023 3:54 am
me too
ZZBOB
Posts: 31 Joined: Sun Mar 02, 2014 7:18 pmAcorn CNC Controller: YesAllin1DC CNC Controller: YesOak CNC controller: NoCNC Control System Serial Number: 20915A (1124081904)DC3IOB: NoCNC12: YesCNC11: YesCPU10 or CPU7: YesLocation: SO. TRENTON
Post
by ZZBOB Wed May 03, 2023 4:44 am
Roger That...
cnckeith
Posts: 7424 Joined: Wed Mar 03, 2010 4:23 pmAcorn CNC Controller: YesAllin1DC CNC Controller: YesOak CNC controller: YesCNC Control System Serial Number: noneDC3IOB: YesCNC11: YesCPU10 or CPU7: Yes
Contact:
Post
by cnckeith Wed May 03, 2023 4:24 pm
ok.. i cut one and its a little tight around the encoder port, some large db9 connectors won't fit but the Centroid ones do. so, making change to the cut out for db9 connector to have .112" clearance on either side.
cnckeith
Posts: 7424 Joined: Wed Mar 03, 2010 4:23 pmAcorn CNC Controller: YesAllin1DC CNC Controller: YesOak CNC controller: YesCNC Control System Serial Number: noneDC3IOB: YesCNC11: YesCPU10 or CPU7: Yes
Contact:
Post
by cnckeith Wed May 03, 2023 4:27 pm
and here is the updated AcornSix cover art.
IPGregory
Posts: 166 Joined: Sat Oct 08, 2022 9:27 pmAcorn CNC Controller: YesPlasma CNC Controller: NoAcornSix CNC Controller: NoAllin1DC CNC Controller: NoHickory CNC Controller: NoOak CNC controller: NoCNC Control System Serial Number: 20D7787C45AB-0819226470 - 98F07B6F97F8-0623237343DC3IOB: NoCNC12: YesCNC11: NoCPU10 or CPU7: NoLocation: Nevada, USA
Post
by IPGregory Thu May 04, 2023 1:01 am
The only problem with this, is that now it will be even more obvious my Acorn is mounted 'upside down'...
cncsnw
Posts: 3876 Joined: Wed Mar 24, 2010 5:48 pm
Post
by cncsnw Thu May 04, 2023 1:39 am
Maybe you could lobby for four separate acrylic cover options: one in each orientation....
andrkorb
Posts: 43 Joined: Sat Jul 31, 2021 5:46 amAcorn CNC Controller: YesPlasma CNC Controller: NoAcornSix CNC Controller: NoAllin1DC CNC Controller: NoHickory CNC Controller: YesOak CNC controller: NoCNC Control System Serial Number: 7804732D0434-050819202, 0008DC111213-0120230049DC3IOB: NoCNC12: YesCNC11: NoCPU10 or CPU7: NoLocation: Poland
Post
by andrkorb Thu May 04, 2023 4:58 am
when it will be avaiable to buy?
cnckeith
Posts: 7424 Joined: Wed Mar 03, 2010 4:23 pmAcorn CNC Controller: YesAllin1DC CNC Controller: YesOak CNC controller: YesCNC Control System Serial Number: noneDC3IOB: YesCNC11: YesCPU10 or CPU7: Yes
Contact:
Post
by cnckeith Thu May 04, 2023 1:35 pm
cncsnw wrote: ↑ Thu May 04, 2023 1:39 am
Maybe you could lobby for four separate acrylic cover options: one in each orientation....
how about custom art generator online so users can make their own. oh wait that's called inkscape.
