Acorn Lathe Intercon help needed
Moderator: cnckeith
-
slodat
- Posts: 793
- Joined: Thu Apr 12, 2018 11:16 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Acorn Lathe Intercon help needed
I figured out the threading feedrate issue.. I had too fast of spindle speed for the threading op. Once I slowed the spindle down, all is well.