hello new to the scene Rebuilding a Koike monograph plasma table
mounted Acorn and tried to run a bench test. no heart beat!
Why would it not have a beat. all lights are on. Followed setup to the T. Very frustrating. I’d rather hit my shin on a receiver hitch.
WHY!Acorn no heartbeat (resolved)
Moderator: cnckeith
-
AtomicAsian
- Posts: 70
- Joined: Thu Jul 14, 2022 10:56 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
-
Gary Campbell
- Posts: 2232
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: WHY!Acorn no heartbeat
Show a picture of the setup and what is connected to the acorn
-
AtomicAsian
- Posts: 70
- Joined: Thu Jul 14, 2022 10:56 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: WHY!Acorn no heartbeat
don’t know how to post a pic smh.
-
ShawnM
- Posts: 2333
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: WHY!Acorn no heartbeat
Click “post reply”
At the bottom left click the “attachment” tab
Click “add files”
Select the pic from your pc and after it uploads click “place inline” and it will place the image wherever the cursor is.
Click “submit”
At the bottom left click the “attachment” tab
Click “add files”
Select the pic from your pc and after it uploads click “place inline” and it will place the image wherever the cursor is.
Click “submit”
-
AtomicAsian
- Posts: 70
- Joined: Thu Jul 14, 2022 10:56 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
-
AtomicAsian
- Posts: 70
- Joined: Thu Jul 14, 2022 10:56 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
-
AtomicAsian
- Posts: 70
- Joined: Thu Jul 14, 2022 10:56 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
-
AtomicAsian
- Posts: 70
- Joined: Thu Jul 14, 2022 10:56 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: WHY!Acorn no heartbeat
i debricked 5 times. i’m clueless . green heart beat is solid. no blue pulse.
-
AtomicAsian
- Posts: 70
- Joined: Thu Jul 14, 2022 10:56 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: WHY!Acorn no heartbeat
so i took off the cnc for pic adapter for the clearpath. and the heart beat came on. Now i can’t get the cncpc to talk to the acorn. Ping test good for 10.168.41.1. Not good for 10.168.41.2.
how do i fix that.
how do i fix that.
-
AtomicAsian
- Posts: 70
- Joined: Thu Jul 14, 2022 10:56 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: WHY!Acorn no heartbeat
powered down everything and powered up. Boom it’s working