Hello!
First post- i'm using Acorn for my gantry mill/'heavy router' build, and have encountered a problem with code when loaded into Centroid. Same problem whether I use code posted from Fusion 360, or load the incuded demo files. See attached pic- it seems that some of the lines are being loaded in the wrong direction...or something. Any clue what is wrong?
Thanks!
Ed
Problem with code in Centroid
Moderator: cnckeith
-
- Posts: 8
- Joined: Thu Jun 20, 2019 8:15 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 78047348f8f5-0606192079
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
Problem with code in Centroid
- Attachments
-
- report_78047348F8F5-0606192079_2019-06-22_18-29-42.zip
- (283.04 KiB) Downloaded 128 times
Re: Problem with code in Centroid
Post a copy of the CNC program shown in your graphic.
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Problem with code in Centroid
program needed like marc said...and...please post a fresh report.zip file.
here is how.
viewtopic.php?f=61&t=3216
here is how.
viewtopic.php?f=61&t=3216
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html