Mozaik Software

[Jrlee]

Maker1970
I have been building cabinets for more than 10 years now. I am planning to order Mozaik after this post. Should be able to try it out over the weekend if nothing comes up.

Jr

[Jrlee]

I acquired Mozaik Friday and have been trying it out. So far it has a positive feel. I had a couple of small problems but the support guys got me help right away and all is well. I think it is going to work well for me. As soon as I get more acqainted with it, and the CNC is up, I will get the CNC option from Mozaik so I can learn how to cut some cabinet parts.
Jr

[Maker1970]

Once you start building cnc cabinets you will wonder how you ever did it before. Everything fits together so nice. All of the holes are drilled and perfect. I sold 3 machines after I got my cnc machine running. I don't crosscut plywood anymore. It's pretty awsome.

[cbb1962]

I stumbled across a link to ALL of the Mozaik training videos going back to version 3 and older. I'm amazed at all the features it has, and I'm only up to the version 5 videos. So far when I look to see if a feature is available, it's been there.

[Maker1970]

Doing a test right now with a .txt post that I had with mach 3 and it seems to work perfect. It accepted all of the m6 commands for the tool change making the added macro totally worth it. I had tried a couple ways of doing this in Mach and it didn't like it. Now I can load a full sheet into the software instead of one tool at a time. The one thing I would caution if you request this post is make sure you are close by during anything with a radius. I have had issues before. Mozaik was awesome about it though.