Looking for a good panel mount USB with a door or cap of some kind so it remains free of dust when not in use. I would like at least 2 ports.
My PC in going in the cabinet.
panel mount USB with a door
Moderator: cnckeith
-
- Posts: 57
- Joined: Mon Jan 22, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clifton Illinois
Re: panel mount USB with a door
Something like this should work for you: https://www.usbfirewire.com/parts/rr-11 ... 1443-04-39
-
- Posts: 3176
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: panel mount USB with a door
If you like Amphenol MIL-spec circular connectors:
https://www.digikey.com/product-detail/ ... ND/5227747
https://www.digikey.com/product-detail/ ... ND/4783338
https://www.digikey.com/product-detail/ ... ND/4783438
https://www.digikey.com/product-detail/ ... ND/5227747
https://www.digikey.com/product-detail/ ... ND/4783338
https://www.digikey.com/product-detail/ ... ND/4783438
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: panel mount USB with a door
Inexpensive solution on Amazon
http://a.co/d/eEkYvTH
http://a.co/d/eEkYvTH
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 2233
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: panel mount USB with a door
FYI, those might be interested: I purchased 2 of the dual USB3 port products that Marty linked to. Delivered today. Not a waterproof solution if needed, but has a good cover for dust or metal chips. 2 thumbs up