Wantai Drives
Moderator: cnckeith
-
Gary Campbell
- Posts: 2232
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: Wantai Drives
On the Homing and Limits page in the wizard... 91- or 92+ sets homing direction
-
Chaz
- Posts: 415
- Joined: Thu Feb 08, 2018 7:57 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Wantai Drives
Dont interferre with direction, keep it correct.Maker1970 wrote: ↑Thu Apr 04, 2019 6:21 pm So here is one for you guys. Trying to home and Y wants to home to the +. I did have to reverse the direction on that axis. Should I have switched a wire instead, or would that equate to the same thing? Or is there a setting to change what direction it home to?
In the wizard (at least, in 4.12), you can see to home + or home -, that is where you need to change it.