All things related to the Centroid Acorn CNC Controller
Moderator: cnckeith
-
martyscncgarage
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Post
by martyscncgarage »
![👍](https://cdn.jsdelivr.net/gh/s9e/emoji-assets-twemoji@11.2/dist/svgz/1f44d.svgz)
Nice router too by the way. Looking forward to seeing a video of it running under Acorn and CNC12 control.
Marty
-
dandonegan
- Posts: 20
- Joined: Sun Apr 03, 2016 2:39 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A900460
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Vermont
Post
by dandonegan »
Here is a picture of the control with the time delay relay installed in case anyone’s interested.
https://photos.app.goo.gl/PIaytV4hpaaTIX7f1
Dan
-
martyscncgarage
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Post
by martyscncgarage »
Right on Dan. Machine is now functional?
Take a video of the machine doing its thing and the control running when you get a chance.
Marty
-
cnckeith
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
-
Contact:
Post
by cnckeith »
dan thanks for the great photos..nice clean install!
im just reposting here again within the forum.