Wireless MPG quit working (RESOLVED)
Moderator: cnckeith
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Wireless MPG quit working (RESOLVED)
If you don't post the offending code, along with a fresh report, we can't help you....nothing to look at
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 218
- Joined: Fri Jul 27, 2018 5:42 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Wireless MPG quit working (RESOLVED)
What does the code have to do with it?
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Wireless MPG quit working (RESOLVED)
You made this statement, "There where changes made so that the single point threading would get out of the thread fast enough to not cut a relief."
I just wanted an example of the code you were using that generated the concern along with a fresh report.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 169
- Joined: Wed Jul 04, 2018 1:32 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: Wireless MPG quit working (RESOLVED)
I had a lot of mysterious problems like this. At the time my machine was on one switch that cut power to everything at one time. It would just cut power to the computer without doing the shut down routine.
I got religious about shutting the computer down properly and never had the problems again.
I got religious about shutting the computer down properly and never had the problems again.
-
- Posts: 218
- Joined: Fri Jul 27, 2018 5:42 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Wireless MPG quit working (RESOLVED)
That was a example of some of the setting in the control panel that was changed that I don’t want to loose. The threading program was generated with the conversational. But that is not the job I was running when this took place. I haven’t threaded anything in mouths.martyscncgarage wrote: ↑Mon Jun 22, 2020 10:10 pmYou made this statement, "There where changes made so that the single point threading would get out of the thread fast enough to not cut a relief."
I just wanted an example of the code you were using that generated the concern along with a fresh report.
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Wireless MPG quit working (RESOLVED)
post a fresh report.zip, otherwise no free support:-))
from the screen shot you posted you are running very old CNC12 version. free support for any version older than v4.5 has ended.
update your system to v4.5 for free support. viewtopic.php?f=60&t=4457
from the screen shot you posted you are running very old CNC12 version. free support for any version older than v4.5 has ended.
update your system to v4.5 for free support. viewtopic.php?f=60&t=4457
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html