Acorn Plasma Build Motion test, Wiring the THC and New Plasma Power Supply Next
Acorn Plasma Build Motion test
Moderator: cnckeith
-
- Posts: 153
- Joined: Wed Sep 06, 2017 1:52 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Acorn Plasma Build Motion test
Looks good so far, let's see the sparks fly!TheKitMill wrote: ↑Wed Jul 03, 2019 6:15 pm Acorn Plasma Build Motion test, Wiring the THC and New Plasma Power Supply Next
https://www.youtube.com/watch?v=I6KPRCGlIxw&t=47s
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 153
- Joined: Wed Sep 06, 2017 1:52 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Acorn Plasma Build Motion test
Hi Marty
No Sparks yet but here is an update. The Plasma lost it pilot Arc so its not doing what it needs to do to cut. It worked for about 15 minutes and then developed a problem The Plasma is being repaired but everything else is looking good. The Auto fill drain system works as designed. Windows update did kill my Ethernet port but I managed to get it working again. Another machine is in the works and ready for motors as soon as they arrive.
Thanks for your help
No Sparks yet but here is an update. The Plasma lost it pilot Arc so its not doing what it needs to do to cut. It worked for about 15 minutes and then developed a problem The Plasma is being repaired but everything else is looking good. The Auto fill drain system works as designed. Windows update did kill my Ethernet port but I managed to get it working again. Another machine is in the works and ready for motors as soon as they arrive.
Thanks for your help
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Acorn Plasma Build Motion test
Awesome!
Can't wait to hear how you dial it all in when you get your machine back.
P.S. it's OK to narrate your video
Can't wait to hear how you dial it all in when you get your machine back.
P.S. it's OK to narrate your video
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ