I just finished my CNCRP/Avid 4848Pro cnc using the Acorn Controller, ClearPath SDSK Servos Nema 34, and a cheap water cooled Spindle. I will probably upgrade to the AVID Spindle soon. I need to go through the settings in Acorn to ensure that I have the best speed I can get. It seems to pause a little to much on the Z movements. I also need to look at the Clearpath settings as those can be effecting it. The Servos have tuning settings to minimize shaking, hard stop and starts. You can also adjust the max speed, torque, and number of missed steps before a drive fault occurs. If you get a jam or hit a limit the missed steps, not moving will allow the servo to stop before any damage. Enjoy the videos.
Success with Acorn CNCRP 4848Pro Clearpath Servos
Moderator: cnckeith
-
- Posts: 97
- Joined: Wed Feb 20, 2019 9:31 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 78047384ad00-0221191675
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Success with Acorn CNCRP 4848Pro Clearpath Servos
- Attachments
-
- report_78047384AD00-0221191675_2019-07-31_11-39-20.zip
- (265.68 KiB) Downloaded 196 times
-
- Posts: 97
- Joined: Wed Feb 20, 2019 9:31 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 78047384ad00-0221191675
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Success with Acorn CNCRP 4848Pro Clearpath Servos
And I got the advertisement in there for ya Keith!
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Success with Acorn CNCRP 4848Pro Clearpath Servos
Awesome! Thanks for posting your experience!
Marty
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 46
- Joined: Mon Aug 19, 2019 4:04 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Success with Acorn CNCRP 4848Pro Clearpath Servos
Devlin,
Can you please post a picture of your control box that has your board and other components in it?
Thanks in advance,
Mark
Can you please post a picture of your control box that has your board and other components in it?
Thanks in advance,
Mark
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Success with Acorn CNCRP 4848Pro Clearpath Servos
awesome! thanks so much for taking the time to post the good photos and video! looks great!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html