Centroid Community CNC Support Forum

Testers.... This is in regard to the action and state of the onscreen RESET button. If memory serves me correctly, when an alarm or the ESTOP was triggered in earlier versions the VCP RESET button state was changed to RESET TRIPPED. This action does not occur with the current release v5.08. Checked...

Risked it for the biscuit, RC4 is working good so far.

No problem! Can you wear out a MPU?

Thanks Keith and Joey! That build seems to make the CWP4 MPG motion smoother. Did that build also have the probe protection fix in it (it doesn't have RC4 in the filename)? Never-the-less, with the probe and TT settings back to where this saga started, things appear to be working right and good. The...

Well, that's fine Howdy Doody! Fix one problem,... https://centroidcncforum.com/viewtopic.php?p=85937#p85937 ...create another. :cry: I removed both inputs and files run as normal. Replacing just ToolTouchOffTriggered is fine, but with ProbeTripped and probe protection enabled, the issue returns. I'...

try and comment out line 35 "G64 ON ......" and then force smoothing ON in the CNC12 smoothing menu then run the job again. That's what I did off to the side in the second half of that video. I commented it out and then chose "Precision Router" before I started it agian. ;)

Since these file were the only ones I've tried on 5.10RC3, I thought I better try some others that have many short segments, and I see that it affects many others as well. I have this file (starts at the 1 minute mark) https://centroidcncforum.com/viewtopic.php?p=20948#p20948 that has a lot of spira...

Here's a video comparison. It's prevalent from start to end. I also tried all other smoothing parameters, and the result were similar for each.

Here are two files, and a screenshot of the layout to show the datum point. Size is 15" x 6". You should notice it right away at the beginning of either file. v5.10RC3 will barely get up to 35ipm while jerking along, where v5.08 will get close to the commanded feedrate on the low to no det...