Centroid Community CNC Support Forum

Hi Swissi,

perfectly done. This is a great timesaver and the video tutorial is also very well made.

Best thing is tool lib in and export, so I can save now projects with tool libs and g-code together.

Uwe

Both are Lenovos, and after looking closer, both with Intel cards

I219LM was with problems before 5.10 (after Acorn power cycle I had to power cycle the PC also)
I217LM was better, only seldom no connection to acorn, solved by ping or power cycle, now perfect

Uwe

Since 5.1 the connection on my PC with intel card is fast and stable.
My other one with Realtek card never had problems.

Uwe

Ethernet communication is slightly changed in 5.1

Uwe

I run CL86T with 4000 pulse 200khz on 5V without problems and the Cl57T V4 with 400khz on the lathe

Uwe

I usually make the first run with a shorter than needed length, measure, adjust and second run is perfect, since it is no problem to tap a thread twice.

Uwe

Windows defender is working ok with CNC12, but I also allow LAN only for updates or if I use CAM to post gcode...

Uwe

For PC tuner PC must have internet connection and it must be set up to US Keyboard, Number and Date format..

Uwe

Video of my stupid simple version at work



Uwe

CNC12 is not with closed loop control of the spindle at 0-10V An exactly stop at depth in the g code will not be possible, but the small overshoot is exactly reputable in the same material The dwell will do noting, but the spindle drift. Air tapping will go deeper than in aluminum, an aluminum deepe...