Do you have a manual from the servo driver?
Uwe
Search found 2089 matches
- Sun May 19, 2024 2:34 am
- Forum: Centroid Acorn CNC Controller
- Topic: Rough Motion on Circular Toolpaths
- Replies: 21
- Views: 282
- Sat May 18, 2024 7:30 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Feature Request - SSV
- Replies: 7
- Views: 1652
Re: Feature Request - SSV
I think it is possible to build a SSV function in the PLC...
Uwe
Uwe
- Sat May 18, 2024 6:35 am
- Forum: Centroid Acorn CNC Controller
- Topic: Tool path starting point
- Replies: 10
- Views: 150
Re: Tool path starting point
Without the g-code file it is difficult to help you...
Uwe
Uwe
- Fri May 17, 2024 5:41 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: turning radius - surface with steps
- Replies: 4
- Views: 131
Re: turning radius - surface with steps
I do not think it is a software problem since my lathe is turning without visible steps.
I would try to use sharp inserts and play with U W in G70.
Uwe
I would try to use sharp inserts and play with U W in G70.
Uwe
- Fri May 17, 2024 5:19 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Lathe fourth axis active tooling
- Replies: 4
- Views: 51
Re: Lathe fourth axis active tooling
My lathe is with XZCY axis, no problem for Acorn6 Lathe ultimate version.
At the moment G2/3 is not running in XY plane, but short vector linear moves will work to mill arcs.
Intercon is only for 2 axis, you have to use CAD/CAM or handcode
Uwe
At the moment G2/3 is not running in XY plane, but short vector linear moves will work to mill arcs.
Intercon is only for 2 axis, you have to use CAD/CAM or handcode
Uwe
- Fri May 17, 2024 1:47 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Lathe fourth axis active tooling
- Replies: 4
- Views: 51
Re: Lathe fourth axis active tooling
Not sure what you want, the machine on the pic do not have a real Y axis.
But with a C-axis you could interpolate a Y-axis.
C-Axis will be the third axis on a lathe.
I have made a PP for fusion to do this on a lathe with Centroid CNC
https://centroidcncforum.com/viewtopic.php?f=66&t=7936
Uwe
But with a C-axis you could interpolate a Y-axis.
C-Axis will be the third axis on a lathe.
I have made a PP for fusion to do this on a lathe with Centroid CNC
https://centroidcncforum.com/viewtopic.php?f=66&t=7936
Uwe
- Fri May 17, 2024 1:38 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Rough Motion on Circular Toolpaths
- Replies: 21
- Views: 282
Re: Rough Motion on Circular Toolpaths
Could also be a problem with rigidity tunning... I use 1 turn/2.5mm on my machines to keep the servo rpm higher = more power while cutting and they run butter smooth, no vibrations. I tune rigidity till they jitter and then back off the settings a little bit till they run smooth and hold a position ...
- Fri May 17, 2024 8:29 am
- Forum: Centroid Acorn CNC Controller
- Topic: Component FB6 near H6 header
- Replies: 9
- Views: 126
Re: Component FB6 near H6 header
Looks like this is tied together with your analogue out problems
Uwe
Uwe
- Thu May 16, 2024 3:51 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Analog Out weirdness, please help <DYN4 as spindle motor>
- Replies: 35
- Views: 440
Re: Analog Out weirdness, please help
For the spindle a KBSI-240D will do the job.
https://acim.nidec.com/drives/kbelectro ... x?la=fr-fr
Uwe
https://acim.nidec.com/drives/kbelectro ... x?la=fr-fr
Uwe
- Thu May 16, 2024 3:15 pm
- Forum: Centroid Acorn CNC Controller
- Topic: New Build: Denford/Sherline MicroLathe
- Replies: 11
- Views: 210
Re: New Build: Denford/Sherline MicroLathe
FWIW, I have skimmed through most of the 403 page Lathe user manual and when I look up G99 there is nothing anywhere that says nothing will happen if it's active and the spindle isn't turning. If the spindle is turning, I am now getting movement so thanks for the tip. But is it possible to command ...