I am using fusion360 also with an modified PP
https://centroidcncforum.com/viewtopic.php?f=66&t=7936
You can use most milling toolpaths, since Y axis is interpolated with the C axis.
Uwe
Search found 2092 matches
- Sun May 19, 2024 5:11 pm
- Forum: Centroid Acorn CNC Controller
- Topic: G112 on lathe? Milling flats with live tooling
- Replies: 4
- Views: 32
- Sun May 19, 2024 4:33 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Rough Motion on Circular Toolpaths
- Replies: 25
- Views: 318
Re: Rough Motion on Circular Toolpaths
Try to change PA_00 - PA_02 to reduce vibration.
Uwe
Uwe
- Sun May 19, 2024 10:18 am
- Forum: Centroid Acorn CNC Controller
- Topic: G112 on lathe? Milling flats with live tooling
- Replies: 4
- Views: 32
Re: G112 on lathe? Milling flats with live tooling
Sure it is possible:
But not with G112, you have to use CAM or for such simple shapes a spreadsheet.
Uwe
But not with G112, you have to use CAM or for such simple shapes a spreadsheet.
Uwe
- Sun May 19, 2024 2:34 am
- Forum: Centroid Acorn CNC Controller
- Topic: Rough Motion on Circular Toolpaths
- Replies: 25
- Views: 318
Re: Rough Motion on Circular Toolpaths
Do you have a manual from the servo driver?
Uwe
Uwe
- Sat May 18, 2024 7:30 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Feature Request - SSV
- Replies: 8
- Views: 1677
Re: Feature Request - SSV
I think it is possible to build a SSV function in the PLC...
Uwe
Uwe
- Sat May 18, 2024 6:35 am
- Forum: Centroid Acorn CNC Controller
- Topic: Tool path starting point
- Replies: 10
- Views: 194
Re: Tool path starting point
Without the g-code file it is difficult to help you...
Uwe
Uwe
- Fri May 17, 2024 5:41 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: turning radius - surface with steps
- Replies: 4
- Views: 143
Re: turning radius - surface with steps
I do not think it is a software problem since my lathe is turning without visible steps.
I would try to use sharp inserts and play with U W in G70.
Uwe
I would try to use sharp inserts and play with U W in G70.
Uwe
- Fri May 17, 2024 5:19 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Lathe fourth axis active tooling
- Replies: 4
- Views: 67
Re: Lathe fourth axis active tooling
My lathe is with XZCY axis, no problem for Acorn6 Lathe ultimate version.
At the moment G2/3 is not running in XY plane, but short vector linear moves will work to mill arcs.
Intercon is only for 2 axis, you have to use CAD/CAM or handcode
Uwe
At the moment G2/3 is not running in XY plane, but short vector linear moves will work to mill arcs.
Intercon is only for 2 axis, you have to use CAD/CAM or handcode
Uwe
- Fri May 17, 2024 1:47 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Lathe fourth axis active tooling
- Replies: 4
- Views: 67
Re: Lathe fourth axis active tooling
Not sure what you want, the machine on the pic do not have a real Y axis.
But with a C-axis you could interpolate a Y-axis.
C-Axis will be the third axis on a lathe.
I have made a PP for fusion to do this on a lathe with Centroid CNC
https://centroidcncforum.com/viewtopic.php?f=66&t=7936
Uwe
But with a C-axis you could interpolate a Y-axis.
C-Axis will be the third axis on a lathe.
I have made a PP for fusion to do this on a lathe with Centroid CNC
https://centroidcncforum.com/viewtopic.php?f=66&t=7936
Uwe
- Fri May 17, 2024 1:38 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Rough Motion on Circular Toolpaths
- Replies: 25
- Views: 318
Re: Rough Motion on Circular Toolpaths
Could also be a problem with rigidity tunning... I use 1 turn/2.5mm on my machines to keep the servo rpm higher = more power while cutting and they run butter smooth, no vibrations. I tune rigidity till they jitter and then back off the settings a little bit till they run smooth and hold a position ...